1996 Chevrolet Monte Carlo Owner's Manual - Page 83

Turn Signal and Lane Change Indicator The turn signal has two upward (for right) and two downward (for left)positions. These positions allow you to signal a turn or a lane change. As you signal a turn or a lane change, if the arrow flashes fdster than normal, a signal bulb may be burned out and other'driverswon't see your turn signal. If a bulb is burned out, replace it to help avoid an accident. If the arrows don't go on at all when you signal a turn, check for burned-out bulbs and check the fuse (see "Fuses and Circuit Breakers" in the Index). To signal a turn, move the lever all the way up or down. When the turn is finished, lever will retum automatically. the An arrow on the instrument panel will flash in the direction of the turn or lane change. Headlamp HighLow Beam To change your headlamps from low beam to high beam, or high to low, pull the multifunction lever all the way toward you. Then release it. When the high beams are on, a light on the instrument panel also will be on. A To signal a lane change,just raise or lower the lever until the arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when you release it.