1996 Chevrolet Monte Carlo Owner's Manual - Page 243

6. To remove a socket, press the tab, turn the socket counterclockwise and pull it out. 7. Pull the bulb out. Do not twist it. Back-up Lamp 1. Open the trunk. The back-up lamp bulbs are in the rear of the trunk lid. 2. Press the tab on the socket, turn the socket counterclockwise and pull it out. 8. Push the new bulb into the socket. 9. Replace the socket in the assembly. 10. Tighten the socket (both kinds) by turning it clockwise. 11. Install the assembly and the two lower wing nuts. 3. To remove the bulb, pull it out of the socket. Do not twist the bulb. 4. Push the new bulb into the socket. 12. Replace the carpeting. 13. Replace the upper (convenience net) wing nut, if equipped. 14. Replace the convenience net, if equipped. 5 . Reverse Steps 1-3 to replace the socket. 6-35