2015 Chrysler 200 Owner Manual - Page 155

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 NOTE: Before programming your RKE transmitters you must select the "Memory To FOB" feature through the • Memory profiles can be set without the vehicle in Uconnect® system screen. Refer to "Uconnect® Settings" PARK, but the vehicle must be in PARK to recall a in "Understanding Your Instrument Panel" for further memory profile. information. • To set a memory profile to your RKE transmitter, refer To program your RKE transmitters, perform the followto "Linking And Unlinking The Remote Keyless Entry ing: Transmitter To Memory" in this section. 1. Cycle the vehicles ignition to the OFF position. Linking And Unlinking The Remote Keyless Entry 2. Select the desired memory profile 1 or 2. Transmitter To Memory NOTE: Your Remote Keyless Entry (RKE) transmitters can be NOTE: If a memory profile has not already been set, refer programmed to recall one of two pre-programmed to ЉProgramming The Memory FeatureЉ in this section for memory profiles with a press of the UNLOCK button on instructions on how to set a memory profile. the RKE transmitter. 3. Press and release the SET button on the memory switch, then within five seconds press and release the button labeled 1 or 2 accordingly. "Memory Profile Set" (1 or 2) will display in the EVIC/DID. 3