2015 Chrysler 200 Owner Manual - Page 162

160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic High Beam Headlamp Control - If Equipped and other obstructions on the windshield or camera lens will cause the system to function improperly. The Automatic High Beam Headlamp Control system • To opt out of the Advanced Auto High-Beam Sensitivprovides increased forward lighting at night by automatity Control (default) and enter Reduced High-Beam ing high beam control through the use of a digital camera Sensitivity Control (not recommended), toggle highmounted on the inside rearview mirror. This camera beam lever 6 full on/off cycles within 10 seconds of detects vehicle specific light and automatically switches ignition ON. System will return to default setting upon from high beams to low beams until the approaching ignition off. vehicle is out of view. If the windshield or Automatic High Beam Headlamp NOTE: Control mirror is replaced, the mirror must be re-aimed to ensure proper performance. See your local authorized • The Automatic High Beam Headlamp Control can be dealer. turned on or off using the Uconnect® System. Refer to "Uconnect® Settings" in "Understanding Your Instru- To Activate ment Panel" for further information. 1. Turn the headlight switch to the AUTO headlight position. • Broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause headlights to 2. Push the multifunction lever away from you (toward remain on longer (closer to the vehicle). Also, dirt, film, front of vehicle) to engage the high beam mode.