2015 Chrysler 200 Owner Manual - Page 444

442 STARTING AND OPERATING To Activate The Autostop Mode, The Following Must airflow to maintain cabin comfort. Customer settings will Occur: be maintained upon return to an engine running condition. • The system must be in STOP/START READY state. A STOP/START READY message will be displayed in Possible Reasons The Engine Does Not the Electronic Vehicle Information Center (EVIC) or AUTOSTOP Driver Information Display (DID) within the Stop/ Prior to engine shut down, the system will check many Start section. Refer to "Electronic Vehicle Information safety and comfort conditions to see if they are fulfilled. Center (EVIC)" or "Driver Information Display (DID)" Detailed information about the operation of the Stop/ in "Understanding Your Instrument Panel" for further Start system may be viewed in the EVIC/DID Stop/Start information. Screen. In the following situations the engine will not • The vehicle must be completely stopped. stop: • The shifter must be in DRIVE or NEUTRAL and the • brake pedal depressed. • The engine will shut down, the tachometer will move to • the zero position and the Stop/Start telltale will illuminate indicating you are in Autostop. While in Autostop, • the Climate Controls system may automatically adjust Driver's seat belt is not buckled. Driver's door is not closed. Battery temperature is too warm or cold. The vehicle is on a steep grade.