2015 Chrysler 200 Owner Manual - Page 156

154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Press and release the LOCK button on the RKE A recall can be cancelled by pressing any of the MEMORY buttons (S, 1, or 2) during a recall. When a transmitter within 10 seconds. recall is cancelled, the driver seat will stop moving. A NOTE: Your RKE transmitters can be unlinked to your delay of one second will occur before another recall can memory settings by pressing the SET (S) button, and be selected. within 10 seconds, followed by pressing the UNLOCK Easy Entry/Exit Seat button on the RKE transmitter. This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the NOTE: The vehicle must be in PARK to recall memory vehicle. positions. If a recall is attempted when the vehicle is not The distance the driver seat moves depends on where in PARK, a message will display in the EVIC/DID. you have the driver seat positioned when you cycle the To recall the memory settings for driver one, press vehicles ignition to the OFF position. MEMORY button number 1 or the UNLOCK button on • When you cycle the vehicles ignition to the OFF the RKE transmitter linked to memory position 1. position, the driver seat will move about 2.4 in (60 To recall the memory setting for driver two, press mm) rearward if the driver seat position is greater than MEMORY button number 2 or the UNLOCK button on or equal to 2.7 in (67.7 mm) forward of the rear stop. the RKE transmitter linked to memory position 2. Memory Position Recall