2015 Chrysler 200 Owner Manual - Page 319

UNDERSTANDING YOUR INSTRUMENT PANEL 317 6. Adaptive Cruise Control (ACC) Distance Setting Dis- 8. Turn Signal Indicators play The arrows will flash with the exterior turn This will display the distance setting for the signals when the turn signal lever is operated. ACC system. For further information, refer to A tone will chime, and an EVIC/DID message "Adaptive Cruise Control (ACC)" in "Underwill appear if either turn signal is left on for standing The Features Of Your Vehicle." more than 1 mile (1.6 km). 7. Seat Belt Reminder Light When the ignition switch is first turned to the ON/RUN position, this light will turn on for four 9. Electronic Stability Control (ESC) to eight seconds as a bulb check. During the bulb The "ESC Activation/Malfunction Indicator check, if the driver's seat belt is unbuckled, a chime will Light" in the instrument cluster will come on sound. After the bulb check or when driving, if the driver when the ignition switch is turned to the or front passenger seat belt remains unbuckled, the Seat ON/RUN position. It should go out with the Belt Indicator Light will flash or remain on continuously. engine running. If the "ESC Activation/Malfunction InRefer to "Occupant Restraints" in "Things To Know dicator Light" comes on continuously with the engine Before Starting Your Vehicle" for further information. running, a malfunction has been detected in the ESC system. If this light remains on after several ignition NOTE: If either indicator flashes at a rapid rate, check for a defective outside light bulb. 4