2015 Chrysler 200 Owner Manual - Page 179

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you are not using it. To Set A Desired Speed Turn the Electronic Speed Control ON. To Deactivate A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the vehicle will deactivate the Electronic Speed Control without erasing the set speed from memory. Pressing the ON/OFF button or turning the ignition switch OFF erases the set speed from memory. To Resume Speed 3 To resume a previously set speed, push the RES button NOTE: The vehicle should be traveling at a steady speed and release. Resume can be used at any speed above and on level ground before pressing the SET (+) or SET (-) 20 mph (32 km/h). button. To Vary The Speed Setting When the vehicle has reached the desired speed, press To Increase Speed the SET (+) or SET (-) button and release. Release the accelerator and the vehicle will operate at the selected When the Electronic Speed Control is set, you can increase speed by pushing the SET + button. speed.