2015 Chrysler 200 Owner Manual - Page 365

UNDERSTANDING YOUR INSTRUMENT PANEL 363 Unless reset, this message will continue to display each time the ignition is cycled to the ON/RUN position. To turn off the message temporarily, push and release the OK button. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure. Instrument Cluster Messages For (EVIC) And (DID) • Front Seatbelts Unbuckled • Driver Seatbelt Unbuckled • Passenger Seatbelt Unbuckled 1. Without pushing the brake pedal, push the ENGINE • Service Airbag System START/STOP button and cycle the ignition to the • Traction Control Off ON/RUN position (do not start the engine). 2. Fully push the accelerator pedal, slowly, three times • within 10 seconds. • 3. Without pushing the brake pedal, push the ENGINE • START/STOP button once to return the ignition to the • OFF/LOCK position. Washer Fluid Low Oil Pressure Low Oil Change Due Fuel Low 4 NOTE: If the indicator message illuminates when you • Service Antilock Brake System start the vehicle, the oil change indicator system did not • Service Electronic Throttle Control reset. If necessary, repeat this procedure.