2015 Chrysler 200 Owner Manual - Page 157

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 The seat will return to its previously set position when TO OPEN AND CLOSE THE HOOD you cycle the vehicles ignition to the ACC or RUN To open the hood, two levers must be released. position. 1. Pull the release lever located below the instrument • The Easy Entry/Easy Exit feature is disabled when the panel and in front of the driver's door. driver seat position is less than 0.9 in (22.7 mm) forward of the rear stop. At this position, there is no benefit to the driver by moving the seat for Easy Exit or Easy Entry. Each stored memory setting will have an associated Easy Entry and Easy Exit position. NOTE: The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the factory. The Easy Entry/Exit feature is enabled (or later disabled) through the programmable features in the Uconnect® system. Refer to "Uconnect® Settings/Customer Programmable Features" in "Understanding Your Instrument Panel" for further information. 3 Hood Release Lever 2. Move to the front of the vehicle.