2015 Chrysler 200 Owner Manual - Page 322

320 UNDERSTANDING YOUR INSTRUMENT PANEL replacement or alternate tires and wheels allow the TPMS 13. Antilock Brake System (ABS) to continue to function properly. This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition CAUTION! switch is turned to the ON/RUN position and may stay on for as long as four seconds. The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and If the ABS light remains on or turns on while driving, it warning have been established for the tire size indicates that the Anti-Lock portion of the brake system equipped on your vehicle. Undesirable system opera- is not functioning and that service is required. However, tion or sensor damage may result when using re- the conventional brake system will continue to operate placement equipment that is not of the same size, normally if the BRAKE warning light is not on. type, and/or style. Aftermarket wheels can cause If the ABS light is on, the brake system should be serviced sensor damage. Using aftermarket tire sealants may as soon as possible to restore the benefits of Anti-Lock cause the Tire Pressure Monitoring System (TPMS) brakes. If the ABS light does not turn on when the sensor to become inoperable. After using an afterignition switch is turned to the ON/RUN position, have market tire sealant it is recommended that you take the light inspected by an authorized dealer. your vehicle to an authorized dealership to have your sensor function checked.