2015 Chrysler 200 Owner Manual - Page 214

212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LANESENSE - IF EQUIPPED LaneSense Operation The LaneSense system is operational at speeds above 37 mph (60 km/h) and below 112 mph (180 km/h). The LaneSense system uses a forward looking camera to detect lane markings and measure vehicle position within the lane boundaries. The driver may manually override the haptic warning by applying torque into the steering wheel at any time. When only a single lane marking is detected and the driver unintentionally drifts across the lane marking (no turn signal applied), the LaneSense system provides a visual warning through the EVIC/DID to prompt the driver to remain within the lane. When only a single lane marking is detected, a haptic (torque) warning will not be When both lane markings are detected and the driver provided. unintentionally drifts out of the lane (no turn signal applied), the LaneSense system provides a haptic warn- NOTE: When operating conditions have been met, the ing in the form of torque applied to the steering wheel to LaneSense system will monitor if the driver's hands are on the steering wheel and provides an audible warning prompt the driver to remain within the lane boundaries. to the driver when the driver's hands are not detected on If the driver continues to unintentionally drift out of the lane, the LaneSense system provides a visual warning the steering wheel. The system will cancel if the driver does not return their hands to the wheel. through the Electronic Vehicle Information Center (EVIC) or Driver Information Display (DID) to prompt the driver to remain within the lane boundaries.