2015 Chrysler 200 Owner Manual - Page 412

410 UNDERSTANDING YOUR INSTRUMENT PANEL In MAX A/C, the blower level and mode position can be adjusted to desired user settings. Pushing other settings will cause the MAX A/C operation to switch to the selected setting and cause MAX A/C to exit. Recirculation Control When outside air contains smoke, odors, or high humidity, or if rapid cooling is desired, you may wish to recirculate interior air by pressing the RECIRCULATION control button. Recirculation mode should only be used temporarily. The Automatic Temperature Control (ATC) recirculation LED will illuminate the button on your touchscreen and the button on your faceplate when either Automatic Operation button is selected. Push either button on your touch1. Push the AUTO button on your faceplate or the button screen or button on your faceplate a second time to turn on your touchscreen on the Automatic Temperature off the Recirculation mode LED and allow outside air Control (ATC) Panel. into the vehicle. NOTE: In cold weather, use of Recirculation mode may lead to excessive window fogging. The recirculation feature may be unavailable (recirculation button on touchscreen greyed out) if conditions exist that could create fogging on the inside of the windshield. On systems with Manual Climate Controls, the Recirculation mode is not allowed in Defrost mode to improve window clearing operation. Recirculation will be disabled automatically if this mode is selected. Attempting to use Recirculation while in this mode will cause the LED in the control button to blink and then turn off.