2015 Jeep Cherokee Owner Manual - Page 109

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 107 WARNING! (Continued) • If you are installing three child restraints next to each other, you must use the seat belt and the center tether anchor for the center position. You must use the LATCH anchors to install the child seat in position (3), behind the driver. You may use either the LATCH anchors or the vehicle's seat belt for installing the child seat in position (1), behind the front passenger. Please refer to "Installing the LATCH-Compatible Child Restraint System" for typical installation instructions. 1. If the selected seating position has a Switchable Automatic Locking Retractor (ALR) seat belt, stow the seat belt following the instructions below. See the section "Installing Child Restraints Using the Vehicle Seat Belt" to check what type of seat belt each seating position has. 2. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can more easily attach the hooks or connectors to the vehicle anchorages. 2 3. Place the child seat between the lower anchorages for that seating position. For some second row seats, you To Install A LATCH-compatible Child Restraint may need to recline the seat and/or raise the head Always follow the directions of the child restraint manurestraint to get a better fit. If the rear seat can be moved facturer when installing your child restraint. Not all child forward and rearward in the vehicle, you may wish to restraint systems will be installed as described here. move it to its rear-most position to make room for the child seat. You may also move the front seat forward to allow more room for the child seat.