2015 Jeep Cherokee Owner Manual - Page 503

STARTING AND OPERATING 501 • The cluster icon and switch lamp will flash then ESC uses sensors in the vehicle to determine the vehicle extinguish when SSC deactivates due to overheated path intended by the driver and compares it to the actual path of the vehicle. When the actual path does not match brakes. the intended path, ESC applies the brake of the appropriate wheel to assist in counteracting the oversteer or WARNING! understeer condition. SSC is only intended to assist the driver in controlling vehicle speed when driving in off road condi- • Oversteer - when the vehicle is turning more than appropriate for the steering wheel position. tions. The driver must remain attentive to the driving conditions and is responsible for maintaining a safe • Understeer - when the vehicle is turning less than vehicle speed. appropriate for the steering wheel position. Electronic Stability Control (ESC) This system enhances directional control and stability of the vehicle under various driving conditions. ESC corrects for oversteering or understeering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the oversteer or understeer condition. Engine power may also be reduced to help the vehicle maintain the desired path. The "ESC Activation/Malfunction Indicator Light" located in the instrument cluster will start to flash as soon as the tires lose traction and the ESC system becomes active. The "ESC Activation/Malfunction Indicator Light" also flashes when the TCS is active. If the "ESC Activation/Malfunction Indicator Light" begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. 5