2015 Jeep Cherokee Owner Manual - Page 411

UNDERSTANDING YOUR INSTRUMENT PANEL 409 6. Blower Control Blower control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available. Adjusting the blower will cause automatic mode to switch to manual operation. The speeds can be selected using either buttons on the faceplate or buttons on the touchscreen as follows: 7. Modes The airflow distribution mode can be adjusted so air comes from the instrument panel outlets, floor outlets, demist outlets and defrost outlets. The Mode settings are as follows: • Panel Mode Air comes from the outlets in the instrument Blower Control Knob On The Faceplate panel. Each of these outlets can be individually adjusted to direct the flow of air. The air vanes of The blower speed increases as you turn the control the center outlets and outboard outlets can be moved clockwise from the lowest blower setting. The blower up and down or side to side to regulate airflow speed decreases as you turn the knob counterclockwise. direction. There is a shut off wheel located below the Buttons On The Touchscreen air vanes to shut off or adjust the amount of airflow from these outlets. Use the small blower icon to reduce the blower setting and the large blower icon to increase the blower setting. Blower can also be selected by pressing the blower bar area between the icons. 4