2015 Jeep Cherokee Owner Manual - Page 171

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 • Broken, muddy, or obstructed headlights and taillights To Deactivate of vehicles in the field of view will cause headlights to 1. Pull the multifunction lever toward you (or rearward remain on longer (closer to the vehicle). Also, dirt, film, in car) to manually deactivate the system (normal and other obstructions on the windshield or camera operation of low beams). lens will cause the system to function improperly. 2. Push back on the multifunction lever once again to If the windshield or Automatic High Beam Headlamp reactivate the system. Control mirror is replaced, the mirror must be re-aimed to ensure proper performance. See your local authorized Daytime Running Lights (DRL) - If Equipped dealer. The Daytime Running Lights will turn On the when the engine is started and remain On unless the headlamps To Activate are turned ON, the parking brake is applied, or the 1. Turn the headlight switch to the AUTO headlight engine is shut Off. position. NOTE: If allowed by law in the country in which the 2. Push the multifunction lever away from you (toward vehicle was purchased the Daytime Running Lights can front of vehicle) to engage the high beam mode. be turned on and off using the Uconnect® System, refer NOTE: This system will not activate until the vehicle is to "Uconnect® Settings" in "Understanding Your Instruat or above 15 mph (35 km/h). ment Panel" for further information. 3