2015 Jeep Cherokee Owner Manual - Page 502

500 STARTING AND OPERATING Deactivating SSC SSC will be deactivated but remain available if any of the following conditions occur: • The vehicle is driven greater than 20 mph (32 km/h) for greater than 70 seconds. • The vehicle is driven greater than 40 mph (64 km/h) (SSC exits immediately). • Driver overrides SSC set speed with throttle or brake application. Feedback To The Driver: • Vehicle speed exceeds 20 mph (32 km/h) but remains The instrument cluster has an SSC icon and the SSC switch has an LED which offer feedback to the driver below 40 mph (64 km/h). about the state SSC is in. • Vehicle is shifted to park. • The cluster icon and switch lamp will illuminate and Disabling SSC remain on solid when SSC is enabled or activated. This SSC will deactivate and be disabled if any of the followis the normal operating condition for SSC. ing conditions occur: • The cluster icon and switch lamp will flash for several • The driver presses the SSC switch. seconds then extinguish when the driver presses the SSC switch but enable conditions are not met. • The driveline is shifted out of 4WD Low Range. • The parking brake is applied. • Driver door opens. • The cluster icon and switch lamp will flash for several seconds then extinguish when SSC deactivates due to excess speed.