2015 Jeep Cherokee Owner Manual - Page 690

688 MAINTAINING YOUR VEHICLE yourself. If an HID headlamp light source fails, take your Bi-Halogen Headlamps vehicle to an authorized dealer for service. 1. Unlock upper access door in wheel liner. NOTE: On vehicles equipped with HID headlamps, 2. Reach behind the headlamp housing to access the when the headlamps are turned on, there is a blue hue to headlamp bulb cap. the lights. This diminishes and becomes more white after 3. Firmly grasp the cap and rotate it counterclockwise to approximately 10 seconds, as the system charges. unlock it. WARNING! A transient high voltage occurs at the bulb sockets of HID headlamps when the headlamp switch is turned ON. It may cause serious electrical shock or electrocution if not serviced properly. See your authorized dealer for service. 4. Firmly grasp the bulb and connector assembly and rotate counterclockwise to remove from the housing. 5. Disconnect the bulb from the electrical connector and then connect the replacement bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.