2015 Jeep Cherokee Owner Manual - Page 200

198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you use the SET - button to decelerate, if the engine's braking power does not slow the vehicle • Pressing the SET - button once will result in a 1 km/h sufficiently to reach the set speed, the brake system decrease in set speed. Each subsequent tap of the will automatically slow the vehicle. button results in a decrease of 1 km/h. • The ACC system decelerates the vehicle to a full stop • If the button is continually pressed, the set speed will when following a target vehicle. If an ACC host vehicle continue to decrease in 10 km/h increments until the follows a target vehicle to a standstill, after two button is released. The decrease in set speed is reseconds the driver will either have to press the RES flected in the EVIC. (resume) button, or apply the accelerator pedal to reengage the ACC to the existing Set Speed. • If the button is continually pressed, the set speed will continue to decrease in 10 km/h increments until the • The ACC system maintains set speed when driving up button is released. The decrease in set speed is rehill and down hill. However, a slight speed change on flected in the DID. moderate hills is normal. In addition, downshifting NOTE: may occur while climbing uphill or descending downhill. This is normal operation and necessary to main• When you override and push the SET + button or SET tain set speed. When driving up hill and down hill, the - buttons, the new Set Speed will be the current speed ACC system will cancel if the braking temperature of the vehicle. exceeds normal range (overheated). Metric Speed (km/h)