2015 Jeep Cherokee Owner Manual - Page 114

112 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing A Child Restraint With A Switchable Automatic Locking Retractor (ALR) 4. Pull on the webbing to make the lap portion tight against the child seat. 1. Place the child seat in the center of the seating 5. To lock the seat belt, pull down on the shoulder part of position. For some second row seats, you may need to the seat belt until you have pulled all the seat belt recline the seat and/or raise the head restraint to get a webbing out of the retractor. Then, allow the webbing better fit. If the rear seat can be moved forward and to retract back into the retractor. As the webbing rearward in the vehicle, you may wish to move it to its retracts, you will hear a clicking sound. This means the rear-most position to make room for the child seat. seat belt is now in the Automatic Locking mode. You may also move the front seat forward to allow 6. Try to pull the webbing out of the retractor. If it is more room for the child seat. locked, you should not be able to pull out any web2. Pull enough of the seat belt webbing from the retractor bing. If the retractor is not locked, repeat step 5. to pass it through the seat belt path of the child 7. Finally, pull up on any excess webbing to tighten the restraint. Do not twist the belt webbing in the seat belt lap portion around the child restraint while you push path. the child restraint rearward and downward into the 3. Slide the latch plate into the buckle until you hear a vehicle seat. "click".