2015 Jeep Cherokee Owner Manual - Page 164

162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To set a memory profile to your RKE transmitter, refer To program your RKE transmitters, perform the followto "Linking And Unlinking The Remote Keyless Entry ing: Transmitter To Memory" in this section. 1. Cycle the vehicles ignition to the OFF position. Linking And Unlinking The Remote Keyless Entry 2. Select the desired memory profile 1 or 2. Transmitter To Memory 3. Press and release the SET button on the memory Your Remote Keyless Entry (RKE) transmitters can be switch, then within five seconds press and release the programmed to recall one of two pre-programmed button labeled 1 or 2 accordingly. "Memory Profile memory profiles with a press of the UNLOCK button on Set" (1 or 2) will display in the EVIC/DID. the RKE transmitter. NOTE: Before programming your RKE transmitters you must select the "Memory To FOB" feature through the Uconnect® system screen. Refer to "Uconnect® Settings " in "Understanding Your Instrument Panel" for further information. 4. Press and release the LOCK button on the RKE transmitter within 10 seconds. NOTE: Your RKE transmitters can be unlinked to your memory settings by pressing the SET (S) button, and within 10 seconds, followed by pressing the UNLOCK button on the RKE transmitter.