2009 Kawasaki JET SKI Ultra 260X Owners Manual - Page 123

2009 Kawasaki JET SKI Ultra 260X Manual

Page 123 highlights

MAINTENANCE AND ADJUSTMENTS 121 it is not, adjust the steering cable. • If Loosen the locknut on the end of the steering ca• ble located to the right of the steering nozzle. j A. Joint B. Locknut A. Steering Nozzle B. Steering Cable C. Locknut D. Joint E. Bolt the joint and check cable adjustment • Reattach again. non-permanent locking agent to the bolt. • Apply And tighten the joint bolt and the locknut securely. Bolt Tightening Torque: 9.8 N·m (1.0 kgf·m, 87 in·lb) an additional check, turn the handlebar all the • As way to the left and right, and measure the distance between the nozzle and the edge of the reverse bucket bracket. It should be equal at both extremes. the bolt and disconnect the cable joint • Remove from the steering nozzle. the handlebars in a straight ahead steering • Center position. • Turn the joint on the cable to adjust the steering.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158

MAINTENANCE AND ADJUSTMENTS
121
j
If it is not, adjust the steering cable.
Loosen the locknut on the end of the steering ca-
ble located to the right of the steering nozzle.
A. Steering Nozzle
B. Steering Cable
C. Locknut
D. Joint
E. Bolt
Remove the bolt and disconnect the cable joint
from the steering nozzle.
Center the handlebars in a straight ahead steering
position.
Turn the joint on the cable to adjust the steering.
A. Joint
B. Locknut
Reattach the joint and check cable adjustment
again.
Apply non-permanent locking agent to the bolt.
And tighten the joint bolt and the locknut securely.
Bolt Tightening Torque:
9.8 N·m (1.0 kgf·m, 87 in·lb)
As an additional check, turn the handlebar all the
way to the left and right, and measure the dis-
tance between the nozzle and the edge of the re-
verse bucket bracket. It should be equal at both
extremes.