2009 Kawasaki JET SKI Ultra 260X Owners Manual - Page 137

MAINTENANCE AND ADJUSTMENTS 135 terminal posts or cables. Replace battery and/or cables immediately if any damage is found. Battery Installation the battery in the reverse order of removal. • Install Secure the black (ground) cable and black sub • cable to the negative terminal. After connecting the battery, coat the terminals with waterproof grease. WARNING Loose battery cables can create sparks which can cause a fire or explosion resulting in injury or death. Make sure the battery terminal screws are tightened securely and the covers are installed over the terminals. j Install the Rubber Covers. CAUTION Do not reverse the battery connections, or damage to the regulator/rectifier unit will result. Battery Characteristics The battery installed in this watercraft is a sealed type, and the sealing strip should not be removed at any time after the specified electrolyte has been installed in the battery for initial service. It is not necessary to check the battery electrolyte level or add distilled water. However, in order to maximize battery life and ensure that it will provide the power needed to start your watercraft, you must properly maintain the battery's charge. When used regularly, the charging Tighten the Terminal Screws Securely.