2011 Kawasaki Concours 14 ABS Owners Manual - Page 198

2011 Kawasaki Concours 14 ABS Manual

Page 198 highlights

196 MAINTENANCE AND ADJUSTMENT the oil has completely drained • After out, install the drain bolt and a new the motorcycle held vertical on • With level ground, fill the gear case up to the top thread of the filler opening with the oil specified below without turning the rear tire. If the rear tire is turned, it is necessary to leave it for about six minutes. about 160 mL (5.41 US oz.) API "GL-5" Hypoid gear oil above 5°C (41°F) SAE 90 below 5°C (41°F) SAE 80 gasket. • A. Drain Bolt B. Oil Filler Cap Final Gear Case Oil Oil Capacity WARNING Oil on tires can make them slippery which can cause an accident and injury. When draining or filling the gear case, be careful that no oil gets on the tires or rims. Clean off any oil that inadvertently gets on them with soap and water. Oil Type NOTE ż"GL-5" indicates a quality and additive rating. "GL-6" rated hypoid gear oils can also be used.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292

196
MAINTENANCE AND ADJUSTMENT
A. Drain Bolt
B. Oil Filler Cap
WARNING
Oil on tires can make them slip-
pery which can cause an acci-
dent and injury.
When draining
or filling the gear case, be care-
ful that no oil gets on the tires or
rims. Clean off any oil that inad-
vertently gets on them with soap
and water.
After the oil has completely drained
out, install the drain bolt and a new
gasket.
With the motorcycle held vertical on
level ground, fill the gear case up to
the top thread of the filler opening
with the oil specified below without
turning the rear tire.
If the rear tire is turned, it is neces-
sary to leave it for about six minutes.
Final Gear Case Oil
Oil Capacity
about 160 mL (5.41 US
oz.)
Oil Type
API “GL-5”
Hypoid gear oil
above 5±C (41±F) SAE 90
below 5±C (41±F) SAE 80
NOTE
°
“GL-5” indicates a quality and addi-
tive rating. “GL-6” rated hypoid gear
oils can also be used.