2015 Kawasaki Vulcan 1700 Voyager ABS Owners Manual - Page 175

174 MAINTENANCE AND ADJUSTMENT ○The initial setting idle speed is 950 r/min (rpm). ○The numerical values on the display NOTE the "MODE-B" switch for more • Push than two seconds to return the idle the "S" button to return to the • Push unit setting menu. and close the throttle a few • Open times to make sure that the idle speed to the initial setting. show the difference between the actual idle speed and the initial setting idle speed. The numerical values "+100" shown on the display as below indicate the actual idle speed "1 050 rpm". • speed does not change. Readjust if necessary. With the engine idling, turn the handlebar to each side. If handlebar movement changes the idle speed, the throttle cables may be improperly adjusted or incorrectly routed, or they may be damaged. Be sure to correct any of these conditions before riding. WARNING Operation with damaged cables could result in an unsafe riding condition. Replace damaged control cables before operation. A.1 050 r/min (rpm)