2015 Kawasaki Vulcan 1700 Voyager ABS Owners Manual - Page 209
2015 Kawasaki Vulcan 1700 Voyager ABS Manual
Page 209 highlights
208 MAINTENANCE AND ADJUSTMENT motorcycle. If needed, use a mild degreaser to remove any oil or grease build up. After washing, rinse your motorcycle thoroughly with clean water to remove any residue (residue from the detergent can damage parts of your motorcycle). Use a soft cloth to dry your motorcycle. As you dry, inspect your motorcycle for chips and scratches. Do not let the water air dry as this can damage the painted surfaces. Start the engine and let it idle for several minutes. The heat from the engine will help dry moist areas. Carefully ride your motorcycle at a slow speed and apply the brakes several times. This helps dry the brakes and restores them to normal operating performance. ○After NOTE riding in an area where the roads are salted or near the ocean, immediately wash your motorcycle with cold water. Do not use warm water as it accelerates the chemical reaction of the salt. After drying, apply a corrosion protection spray on all metal and chrome surfaces to prevent corrosion. ○Condensation may form on the inside of the headlight lens after riding in the rain or washing the motorcycle. To remove the moisture, start the engine and turn on the headlight. Gradually the condensation on the inside of the lens will clear off. Semi-gloss Finish To clean the semi-gloss finish; When washing the motorcycle, always use a mild neutral detergent and water. •