2013 Lincoln MKZ Owner Manual Printing 2 - Page 139

Seats Linking a Pre-Set Position to your Remote Control or Intelligent Access Key Your vehicle can save the pre-set memory positions for up to three remote controls or intelligent access (IA) keys. 1. With the ignition on, move the memory positions to the desired positions. 2. Press and hold the desired pre-set button for about five seconds. A chime will sound after about two seconds. Continue holding until a second chime is heard. 3. Within three seconds, press the lock button on the remote control you are linking. To unlink a remote control, follow the same procedure - except in step 3, press the unlock button on the remote control. Note: To stop seat movement during a recall, press any driver seat adjustment control, any of the memory buttons, or any mirror control switch. Seat movement will also stop if you move your vehicle. Note: If more than one linked remote control or IA key is in range, the memory function will move to the settings of the first key stored. E142554 Saving a Pre-Set Position 1. Switch the ignition on. 2. Adjust the seat, exterior mirrors and power steering column to your desired position. 3. Press and hold the desired pre-set button until you hear a single chime. Up to three pre-set memory positions may be saved. A memory pre-set may be saved at any time. Recalling a Pre-Set Position Press and release the pre-set button associated with your desired driving position. The seat, mirrors and steering column will move to the position stored for that pre-set. Note: A pre-set memory position can only be recalled when the ignition is off, or when the transmission selector lever is in position P or N (and your vehicle is not moving) if the ignition is on. A pre-set memory position can also be recalled by pressing the unlock button on your remote control or intelligent access key if it is linked to a pre-set position. 137 MKZ (CC9)