2013 Lincoln MKZ Owner Manual Printing 2 - Page 245

Roadside Emergencies 1. 2. 3. 4. Turn the ignition off. Turn the ignition to crank. Turn the ignition off. Turn the ignition on again to re-enable the fuel pump. Preparing Your Vehicle Note: Do not attempt to push-start your automatic transmission vehicle. Automatic transmissions do not have push-start capability. Attempting to push-start a vehicle with an automatic transmission may cause transmission damage. Note: Use only a 12-volt supply to start your vehicle. Note: Do not disconnect the battery of the disabled vehicle as this could damage the vehicle's electrical system. Park the booster vehicle close to the hood of the disabled vehicle, making sure the two vehicles do not touch. Turn all accessories off. For vehicles equipped with a push button start system: 1. Press the START/STOP button to turn the ignition off. 2. Press the brake pedal and press the START/STOP button (crank attempt). 3. Remove your foot from the brake pedal and press the START/STOP button (ignition off). 4. Press the START/STOP button again to re-enable the fuel system. Connecting the Jumper Cables WARNING Do not attach the cables to fuel lines, engine rocker covers, the intake manifold or electrical components as grounding points. Stay clear of moving parts. To avoid reverse polarity connections, make sure that you correctly identify the positive (+) and negative (-) terminals on both the disabled and booster vehicles before connecting the cables. Note: In the illustration, the bottom vehicle represents the booster vehicle. JUMP-STARTING THE VEHICLE WARNINGS The gases around the battery can explode if exposed to flames, sparks, or lit cigarettes. An explosion could result in injury or vehicle damage. Batteries contain sulfuric acid which can burn skin, eyes and clothing, if contacted. Use only an adequate-sized cable with insulated clamps. 243 MKZ (CC9)