2013 Lincoln MKZ Owner Manual Printing 2 - Page 302

Wheels and Tires What to do after the Tire has been Sealed After using the kit to seal your tire, you will need to replace the sealant canister and clear tube (hose). Sealing compound and spare parts can be obtained and replaced at an authorized Ford Motor Company dealership or tire dealer. Empty sealant bottles may be disposed of at home; however, liquid residue from the sealing compound should be disposed by your local Ford Motor Company dealership or tire dealer, or in accordance with local waste disposal regulations. Note: After the sealing compound has been used, the maximum vehicle speed is 50 mph (80 km/h) and the maximum driving distance is 120 miles (200 kilometers). The sealed tire should be inspected immediately. Note: After sealant use, the tire pressure monitoring system sensor and valve stem on the wheel must be replaced by an authorized Ford dealer. You can check the tire pressure any time within the 120 miles (200 kilometers) by performing the procedure from Second stage: Checking tire pressure listed previously. E144624 Removal of the sealant canister from the kit E144623 1. Unwrap the clear tube from the compressor housing. 2. Locate the yellow cap at the end of the clear tube. E144625 3. Using the yellow cap tool, press the tab located on the kit compressor housing while pulling up on the sealant canister. 300 MKZ (CC9)