2013 Lincoln MKZ Owner Manual Printing 2 - Page 26

Child Safety 8. Remove remaining slack from the belt. Force the seat down with extra weight, for example, by pressing down or kneeling on the child restraint while pulling up on the shoulder belt in order to force slack from the belt. This is necessary to remove the remaining slack that will exist once the extra weight of the child is added to the child restraint. It also helps to achieve the proper snugness of the child seat to your vehicle. Sometimes, a slight lean toward the buckle will provide extra help to remove remaining slack from the belt. 9. Attach the tether strap (if the child seat is equipped). Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician to make certain the child restraint is properly installed. In Canada, check with your local St. John Ambulance office for referral to a Certified Passenger Seat Technician. Inflatable safety belts E142528 1. Position the child safety seat in a seat with a combination lap and shoulder belt. E142534 10. Before placing the child in the seat, forcibly move the seat forward and back to make sure the seat is securely held in place. To check this, grab the seat at the belt path and attempt to move it side to side and forward and back. There should be no more than 1 inch (2.5 centimeters) of movement for proper installation. E146522 2. After positioning the child safety seat in the proper seating position, grasp the shoulder belt and lap belt together behind the belt tongue. 24 MKZ (CC9)