2013 Lincoln MKZ Owner Manual Printing 2 - Page 293

Vehicle Care If the leather cannot be completely cleaned using a mild soap and water solution, the leather may be cleaned using a commercially available leather cleaning product designed for automotive interiors. Note: To check for compatibility, first test any cleaner or stain remover on an inconspicuous part of the leather. You should remove dust and loose dirt with a vacuum cleaner. clean spills and stains as quickly as possible. check for compatibility by first testing any cleaner or stain remover on an inconspicuous part of the leather. Note: Industrial-strength or heavy-duty cleaners in combination with brush agitation to remove brake dust and dirt, could wear away the clear coat finish over a period time. Note: Do not use hydrofluoric acid-based or high caustic-based wheel cleaners, steel wool, fuels or strong household detergents. Note: If you intend parking your vehicle for an extended period after cleaning the wheels with a wheel cleaner, drive your vehicle for a few minutes before doing so. This will reduce the risk of increased corrosion of the brake discs. Alloy wheels and wheel covers are coated with a clear coat paint finish. To maintain their condition we recommend that you: • Clean the wheels weekly using Motorcraft Wheel and Tire Cleaner. Apply using manufacturer's instructions. Use a sponge to remove heavy deposits of dirt and brake dust accumulation. Rinse thoroughly with a strong stream of water when you have completed the cleaning process. To remove tar and grease, use Motorcraft Bug and Tar Remover. Do not use the following products as these may damage the leather oil/petroleum-based leather conditioners. household cleaners. alcohol solutions. solvents or cleaners intended specifically for rubber, vinyl and plastics. • • CLEANING THE ALLOY WHEELS Note: Do not apply a cleaning chemical to warm or hot wheel rims and covers. Note: Some automatic car washes may cause damage to the finish on your wheel rims and covers. • 291 MKZ (CC9)