2013 Lincoln MKZ Owner Manual Printing 2 - Page 298

Wheels and Tires General Information WARNING Failure to follow these guidelines could result in an increased risk of loss of vehicle control, injury or death. Note: Do not use the kit if a tire has become severely damaged by driving the vehicle with a tire that has insufficient air pressure. Only punctured areas located within the tire tread can be sealed with the kit. Do not attempt to repair punctures larger than 1.4 inch (6.4 millimeters) or damage to the tire's sidewall. The tire may not completely seal. Loss of air pressure may adversely affect tire performance. For this reason: Note: Do not drive the vehicle above 50 mph (80 km/h). Note: Do not drive further than 120 miles (200 kilometers). Drive only to the closest Ford Motor Company authorized dealer or tire repair shop to have your tire inspected. • • Drive carefully and avoid abrupt steering maneuvers. Periodically monitor tire inflation pressure in the affected tire; if the tire is losing pressure, have the vehicle towed. Read the information in the Tips for Use of the Kit section to make sure safe operation of the kit and your vehicle. • • Tips for Use of the Kit Read the following list of tips to ensure safe operation of the kit: • Before operating the kit, make sure your vehicle is safely off the road and away from moving traffic. Turn on the hazard lights. Always set the parking brake to ensure the vehicle doesn't move unexpectedly. Do not remove any foreign objects, such as nails or screws, from the tire. When using the kit, leave the engine running (only if the vehicle is outdoors or in a well-ventilated area) so the compressor doesn't drain the vehicle's battery. Do not allow the compressor to operate continuously for more than 15 minutes; this will help prevent the compressor from overheating. Never leave the kit unattended when it is operating. Sealant compound contains latex. Make sure that you use the non-latex gloves provided to avoid an allergic reaction. Keep the kit away from children. Only use the kit when the ambient temperature is between -22°F (-30°C) and 158°F (70°C). • • • • • • • 296 MKZ (CC9)