2013 Lincoln MKZ Owner Manual Printing 2 - Page 60

MyKey™ • Audio system maximum volume of 45%. A message will be shown in the display when you attempt to exceed the limited volume. Also, the speed-sensitive or compensated automatic volume control will be disabled. Always on setting. When this is selected, you will not be able to turn off Advance Trac (if your vehicle is equipped with this feature). MyKey is successfully created. Make sure you label it so you can distinguish it from the admin keys. You can also program configurable settings for the key(s). See Programming/Changing Configurable Settings. • Programming/Changing Configurable Settings Use the information display to access your configurable MyKey settings. 1. Switch the ignition on using an admin key or fob. 2. Access the main menu on the information display controls, and select Settings, then MyKey by pressing OK or > button. 3. Use the arrow buttons to get to a feature. 4. Press OK or > to make a selection. Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the vehicle off, however, you will need an admin key to change or clear your MyKey settings. CREATING A MYKEY Use the information display to create a MyKey: 1. Insert the key you want to program into the ignition. If your vehicle is equipped with a push-button start, place the intelligent access key fob into the backup slot. The location of your backup slot is in another chapter. See Starting and Stopping the Engine (page 150). 2. Switch the ignition on. 3. Access the main menu on the information display controls, and select Settings then MyKey by pressing OK or the > button. 4. Press OK or the > button to select Create MyKey. 5. When prompted, hold the OK button until you see a message informing you to label this key as a MyKey. The key will be restricted at the next start. CLEARING ALL MYKEYS You can clear all MyKeys within the same key cycle as you created the MyKey. If you switch your ignition off, however, you will need to use an admin key to clear your MyKeys. 58 MKZ (CC9)