3Com 3C886 User Guide - Page 32
Installing Analog Equipment, Installing the Power Cable, Installing Analog, Equipment
![]() |
UPC - 662705169279
View all 3Com 3C886 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
32 CHAPTER 3: HARDWARE DESCRIPTION AND INSTALLATION Installing Analog You can connect an analog touch-tone telephone, answering machine, fax Equipment machine, or external analog modem to the 56K LAN Modem's pass-through Phone port. You will need an RJ-11 to RJ-11 cable that came with the analog device for your analog phone port connection. To install an analog device: 1 Insert one end of an RJ-11 cable into the port labeled Phone on the back of the 56K LAN Modem, as shown in Figure 14. 10-18 0.8 A VDC MAX LINE RESET PHONE Figure 14 Analog Equipment Connection 2 Insert the other end of the RJ-11 cable into the appropriate RJ-11 port on the analog device. Installing the Power Cable To install the power cable: 1 Connect the 56K LAN Modem power module cable to the 10-18 VDC power connector on the back panel of the 56K LAN Modem, as shown in Figure 15. 10-18 0.8 A VDC MAX RESET TELCO PHONE Figure 15 Power Cable Connection
![](/manual_guide/products/3com-3c886-user-guide-8159442/32.png)