3Com 3C886 User Guide - Page 62
Setting Up a Connection to a Private Network, Before You Begin
UPC - 662705169279
View all 3Com 3C886 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
62 CHAPTER 6: ADVANCED CONFIGURATION Setting Up a Connection This section describes your 56K LAN Modem setup procedures for accessing a to a Private Network private network, such as a remote office or corporate LAN. Before You Begin Before you begin, you will need the following information from your Network Administrator: s Telephone number(s) you must dial to access this private network s User ID and password s WAN link IP address (if the private network to which you are connecting requires a static IP address and subnet mask). In addition, you may need the following information, depending on your particular network setup. Check with your Network Administrator. s IP address/subnet mask of the remote LAN you wish to access s Domain name of the remote LAN s DNS IP address(es) Setting Up a Connection to a Remote LAN The following steps allow you to set up a connection to a remote LAN. 1 From the 56K LAN Modem main page, click the Service Providers image. The Service Provider Selection window appears. Figure 38 Private Network Service Provider Selection Window 2 Select New Private Network from the drop-down list box and click Select. The Private Network Parameters window appears.