3Com 3C886 User Guide - Page 38
TCP/IP Setup Using Windows NT 4.0, You will need your Windows NT 4.0 installation CD-ROM., Network
UPC - 662705169279
View all 3Com 3C886 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
38 CHAPTER 4: SETTING UP TCP/IP FOR WINDOWS AND MACINTOSH Figure 21 TCP/IP Properties Advanced Screen 10 Check the box to set TCP/IP as the default protocol. 11 Click OK to close the TCP/IP Properties dialog box. 12 Click OK to close the Network dialog box. 13 Restart Windows 98 or 95 to let these changes take effect. TCP/IP Setup Using Windows NT 4.0 Windows NT 4.0 provides TCP/IP as part of its standard operating system. If you have not already set up TCP/IP, do the following. You will need your Windows NT 4.0 installation CD-ROM. 1 From the Control Panel, double click Network. The Network dialog box appears. 2 Select the Protocols tab, as shown in Figure 22.
38
C
HAPTER
4: S
ETTING
U
P
TCP/IP
FOR
W
INDOWS
AND
M
ACINTOSH
Figure 21
TCP/IP Properties Advanced Screen
10
Check the box to set TCP/IP as the default protocol.
11
Click
OK
to close the TCP/IP Properties dialog box.
12
Click
OK
to close the Network dialog box.
13
Restart Windows 98 or 95 to let these changes take effect.
TCP/IP Setup Using
Windows NT 4.0
Windows NT 4.0 provides TCP/IP as part of its standard operating system. If you
have not already set up TCP/IP, do the following.
You will need your Windows NT 4.0 installation CD-ROM.
1
From the Control Panel, double click
Network
.
The Network dialog box appears.
2
Select the
Protocols
tab, as shown in Figure 22.