3Ware 9650SE-8LPML-SGL Installation Guide - Page 18
Drive Installation Considerations, Things to Watch Out For During Installation of the RAID Controller - sata raid
UPC - 693494600087
View all 3Ware 9650SE-8LPML-SGL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Chapter 1. Getting Started Drive Installation Considerations Selecting an enclosure. If you are planning to use RAID 1, 5, 6, 10, or 50, you may want to consider installing drives into hot-swappable enclosures, so that they can be easily removed in the event of a drive failure. For a discussion of RAID levels, see the 3ware Serial ATA RAID Controller User Guide. When to install the drives. If the drives are not already installed in your computer, you can choose to install them either before or after installing the 9650SE controller. In either case, be sure to connect the SATA cable from the drive to the controller and connect the drive to power before turning on the system or you will not be able to see or configure the drives. Things to Watch Out For During Installation of the RAID Controller Be careful when installing the 3ware RAID controller into your system. Excessive force can damage the board or your system. Be sure to follow the installation instructions in "Chapter 2. Installing Your 3ware RAID Controller" on page 15. 14 3ware 9650SE Serial ATA RAID Controller Installation Guide