3Ware 9650SE-8LPML-SGL Installation Guide - Page 23

was used to secure the filler bracket in step 5. - raid cards

Get 3Ware 9650SE-8LPML-SGL - Pci-e Sataraid PDF manuals and user guides
UPC - 693494600087
View all 3Ware 9650SE-8LPML-SGL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Step 2. Install the Controller in the Computer 7 Press down gently on the edge of the 3ware RAID controller directly above the PCI Express slot until it is fully seated. Figure 13. Inserting Controller Into PCI Express Slot Do NOT use a PCI or PCI-X slot. Use a PCI Express slot for the 3ware 9650SE controller. If in doubt about what slots you have, check the documentation for your motherboard. 8 Check that the 3ware RAID controller's metal bracket covers the hole in the case and secure the bracket with the screw that was used to secure the filler bracket in step 5. 9 When you tighten the screw on the bracket to the enclosure, make sure the card is not slanted in any direction; otherwise the card will not work properly. www.3ware.com 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
Step 2. Install the Controller in the Computer
www.3ware.com
19
7
Press down gently on the edge of the 3ware RAID controller
directly above the PCI Express slot until it is fully seated.
Figure 13.
Inserting Controller Into PCI Express Slot
8
Check that the 3ware RAID controller’s metal bracket covers
the hole in the case and secure the bracket with the screw that
was used to secure the filler bracket in step 5.
9
When you tighten the screw on the bracket to the enclosure,
make sure the card is not slanted in any direction; otherwise the
card will not work properly.
Use a PCI Express slot
for the 3ware 9650SE
controller.
If in doubt about what
slots you have, check
the documentation for
your motherboard.
Do NOT
use a PCI or
PCI-X slot.