3Ware 9650SE-8LPML-SGL Installation Guide - Page 6
System Requirements, Motherboard and Slot Requirements - raid controller
UPC - 693494600087
View all 3Ware 9650SE-8LPML-SGL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Chapter 1. Getting Started For the 4-port, 8-port, 12-port, and 16-port models, Multi-lane™ break-out cables (SFF-8087) are provided, for use with individual drives. Each of these Multi-lane cables supports up to four serial ATA drives. One is provided with the 4-port controller Two are provided with the 8-port controller Three are provided with the 12-port controller Four are provided with the 16-port controller Note: For the 4-port, 8-port, 12-port, and 16-port models. SFF-8087 to SFF-8087 Multi-lane cables, for use with a Multi-lane backplane, can be purchased separately. For details about these cables, see "Multi-lane Cables" on page 7. For the 24-port model, three Multi-Lane M8 cables are provided that each support up to eight serial ATA drives, through connection to Multi-lane (SFF-8087) backplanes. Note: Cables for use with a non Multi-lane backplane ("direct attach") or with individual drives can be purchased separately. For more about these cables see "Multi-lane M8 fanout cable" on page 9. If you purchased the 3ware RAID controller in a single pack or as part of a bulk pack, cables are not included. System Requirements Motherboard and Slot Requirements A workstation-class or server-class motherboard with PCI-Express® slot that supports the specific 9650SE model, as shown in Table 1. A list of systems that have been tested is available at http://www.3ware.com/products/ compatibility_sata2.asp 2 3ware 9650SE Serial ATA RAID Controller Installation Guide