AIWA AM-F70 Operating Instructions - Page 68
Md Guide Messages
View all AIWA AM-F70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
MD GUIDE MESSAGES BLANK DISC q Nothing is recorded on the disc. Can't COPY q Digital recording is prohibited by the SCMS standard. + See "About the Serial Copy Management System (SCMS)" on page 22. Can't EDIT q Tracks are too short to be combined. + See "The limitations of MD on page 76. q The combine function was used while playing the first track. q The divide function was used at the beginmng of a track. q The combine function was used to combine a track recorded in monaural with a track recorded in stereo. CAUTION ! q Recording cannot be continued by damage of the disc. q The unit operates abnormally. + Reset the unit pressing the RESET button on the bottom of the unit. No Signal q Playback of the connected unit has not started yet. q Opbcal digital cable is not connected completely. LOW BATT q The batteries wear out. OPEN q The disc holder IS not closed. PB DISC q Recording is attempted playback only. on the disc for PROTECTED q The disc is record-protected. TEMP OVER ! q The ambient temperature too low. is too high or TOC FULL q There are too many tracks or emphasis data to be recorded or edited. DISC ERROR q The disc is damaged by scratches. q The TOC data is not registered correctly. DISC FULL q There is not enough time remaining on the disc to record. q There are too many tracks to be recorded. HOLD q The HOLD switch is set to HOLD position. NO DISC q No disc is inside the unit. 68