Acer Altos G710 Altos G710 User's Guide - Page 49
Installation precautions, ESD precautions, Preinstallation instructions
View all Acer Altos G710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
39 Installation precautions Before you install any server component, we recommend that you read the following sections. These sections contain important ESD precautions along with preinstallation and post-installation instructions. ESD precautions Electrostatic discharge (ESD) can damage your processor, disk drives, expansion boards, motherboard, memory modules and other components. Always observe the following precautions before you install a server component: 1 Do not remove a component from its protective packaging until you are ready to install it. 2 Wear a wrist grounding strap and attach it to a metal part of the server before handling components. If a wrist strap is not available, maintain contact with the server throughout any procedure requiring ESD protection. Preinstallation instructions Always observe the following before you install any component: 1 Turn off the system and all the peripherals connected to it. 2 Unplug all cables from the power outlets. 3 Place the system unit on a flat, stable surface. 4 Open the system according to the instructions on page 41. 5 Remove the air baffle. 6 Follow the ESD precautions described in this section when handling a server component. 7 Remove any expansion board(s) or peripheral(s) that block access to the DIMM slots or other component connector. See the following sections for specific installation instructions on the component you want to install.