Acer Altos G710 Altos G710 User's Guide - Page 63
Replacing the CD-ROM drive, described
View all Acer Altos G710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
53 6 Insert the drive carrier with the newly-installed FDD into the drive bay. 7 Connect the IDE and FDD cables to the new drive. 8 Observe the post-installation instructions described on page 40. Replacing the CD-ROM drive Note: If you are installing a new drive in an empty drive bay, skip steps 2 to 4. 1 Observe the ESD precautions and pre-installation procedures described on page 39. 2 Disconnect the power and IDE cables from the old drive.
53
6
Insert the drive carrier with the newly-installed FDD into the drive
bay.
7
Connect the IDE and FDD cables to the new drive.
8
Observe the post-installation instructions described on page 40.
Replacing the CD-ROM drive
Note:
If you are installing a new drive in an empty drive bay, skip
steps 2 to 4.
1
Observe the ESD precautions and pre-installation procedures
described on page 39.
2
Disconnect the power and IDE cables from the old drive.