Acer Altos G710 Altos G710 User's Guide - Page 58
Attach the SATA backplane SAF-TE cable to the JP3 connector
View all Acer Altos G710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
48 3 System upgrade (3) Attach the system's power cable to the SATA power cable connector on the backplane (4). (4) Attach the SATA backplane SAF-TE cable to the JP3 connector on the backplane (5), then connect the other end of the cable to the J6 connector on the controller. Refer to the illustration on page 48 when installing the SATA backplane, or removing and replacing the cables. Note: The SATA RAID backplane data cables must be installed and removed in the following order: SATA0, SATA1, SATA2, and SATA 3. 5 Observe the post-installation instructions described on page 40. Important: When you are detaching the hot-plug cage from the chassis, make sure to first remove all hard disks from their carriers. For instructions, refer to the succeeding section.