Acer Altos G710 Altos G710 User's Guide - Page 77
Installing the Altos RAID-enabler (optional
View all Acer Altos G710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
67 Installing the Altos RAID-enabler (optional) This section explains how to install the Altos RAID-enabler (iButton) and an iTBBU. The iTBBU (Transportable Battery Backup Unit) shown below is for your reference only. You have the option to install either an iTBBU or an unbuffered ECC DDR DIMM into the DIMM slot. Note: The Altos RAID-enabler (iButton) is not included with your system. To purchase an Altos RAID-enabler (iButton) and iTBBU, contact your local Acer representative or order directly from http:/ /www.acer.com/. The Altos RAID-enabler (iButton) works in association with the DDR DIMM or iTBBU to subsequently store data from the HDD to the DIMM. iTBBU includes a battery pack attached onto the memory module that protects data in the cache memory in the event of a power failure. 1 Observe the ESD precautions and pre-installation procedures described on page 39. 2 Install the Altos RAID-enabler (iButton) and the iTBBU by following the steps below: (1) Open the clips on the socket. (2) Align then insert the iTBBU into the DIMM slot (1). (3) Press the holding clips inward to lock the iTBBU in place (2).