Acer Altos G710 Altos G710 User's Guide - Page 87
Remove the bezel. Refer to Removing the bezel on for, Set the cover aside.
View all Acer Altos G710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
77 4 Remove the bezel. Refer to "Removing the bezel" on page 42 for instructions. 5 Remove the ePanel module cover from the bezel by the following steps: (1) Remove the two screws that hold the module cover to the bezel (1). Set the screws aside. (2) Remove the module cover (2). Set the cover aside. 6 Remove the ePanel module and cables from its protective packaging. 7 Route the following cables to the appropriate chassis openings: (1) ePanel cable - Connect to the ePanel connector on the mainboard (1, 3, 4). (2) ePanel power cable - Connect to any of the system's power cables (2, 5). 8 Attach the other end of the ePanel cable to the module's ePanel connector (6).
77
4
Remove the bezel. Refer to “Removing the bezel” on page 42 for
instructions.
5
Remove the ePanel module cover from the bezel by the following
steps:
(1)
Remove the two screws that hold the module cover to the
bezel
(1)
. Set the screws aside.
(2)
Remove the module cover
(2)
. Set the cover aside.
6
Remove the ePanel module and cables from its protective
packaging.
7
Route the following cables to the appropriate chassis openings:
(1)
ePanel cable — Connect to the ePanel connector on the
mainboard
(1, 3, 4)
.
(2)
ePanel power cable — Connect to any of the system’s power
cables
(2, 5)
.
8
Attach the other end of the ePanel cable to the module’s ePanel
connector
(6)
.