Acer Altos G710 Altos G710 User's Guide - Page 74
described on Observe the ESD precautions and pre-installation procedures
View all Acer Altos G710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
64 3 System upgrade Important: Before removing any DIMM from the mainboard, make sure to create a backup file of all important data. 1 Observe the ESD precautions and pre-installation procedures described on page 39. 2 Locate the DDR2 DIMM slots on the mainboard. 3 Press the holding clips on both sides of the socket outward to release the DIMM. 4 Gently pull the DIMM upward to remove it from the socket . Important: Remove identical memory modules at the same time and in the following sequence: 1B and 1A, 2B and 2A, 3B and 3A, and 4B and 4A. Refer to the illustration above for the recommended DIMM sequence. Note: Place your forefingers on the top of the DIMM before pressing the holding clips to gently disengage the DIMM from the socket.
3 System upgrade
64
Important:
Before removing any DIMM from the mainboard,
make sure to create a backup file of all important data.
1
Observe the ESD precautions and pre-installation procedures
described on page 39.
2
Locate the DDR2 DIMM slots on the mainboard.
3
Press the holding clips on both sides of the socket outward to
release the DIMM.
4
Gently pull the DIMM upward to remove it from the socket .
Important:
Remove identical memory modules at the same time
and in the following sequence: 1B and 1A, 2B and 2A, 3B and 3A,
and 4B and 4A. Refer to the illustration above for the
recommended DIMM sequence.
Note:
Place your forefingers on the top of the DIMM before
pressing the holding clips to gently disengage the DIMM from the
socket.