Acer INTPJ-STK1 User Manual - Page 3
Introduction
View all Acer INTPJ-STK1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Introduction Smart Touch Kit is the first one that supports finger touch and very convenience to take in the world. It can work with any projectors or LCD screen and turn the projection screen or LCD screen into finger touchable. Key features: portable and finger touch; detect any non- transparent objects;no requirement for the board,work on any flat surfaces, no limited on the material; active sizes range from 40"-100''; can work with common board and save the record of both marker pen and finger writing in the same board. FP3 includes:Emitter,Sensor,Calibration Software,Application Software Emitter Sensor Features 1,Support finger touch: Use finger instead of pen to write or control; 2,Support Multi-touch: Ten People can write and erase simultaneously; 3,Shortest installation distance is 35cm: For example, the active size is 80inch, then installation distance is around 100cm; 4,Portable and easy to install. Total weight is around 1.6kg. The installation is very easy. Just put the emitter part to the upper of projection screen by double adhesive tape, and put the Sensor (camera)part together with projector or ceiling by mount. No need professional technicians. 5,Turn common board or wall into touchable. Our product can turn any flat surface (like board, wall,LCD) into touchable; just fix the emitter part on the upper of the projection screen. 6,Support to operate by any non-transparent objects. In the active area, any non-transparent objects can work as pen does. 7,Convert Normal Led screen into touchable.Support the active screen 40-100inch.when using,add one piece glass on screen surface.and fix the iwb hardware on glass ,then convert led screen into touchable.compare to the infrared technology solution,low costs,no need customize,the price is not increased by the screen size. 1