Acer TravelMate 310 User Guide - Page 107
Extended Capabilities Port ECP as
View all Acer TravelMate 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
310-e.book Page 87 Tuesday, October 27, 1998 5:17 PM Setup Utility Parameter Parallel Port Operation mode Base I/O Address Interrupt ECP DMA Speaker Boot Display Device Description Enables or disables the parallel port. Options: Enabled or Disabled Sets the operation mode of the parallel port. Options: Output only, Bi-directional, or ECP Sets the I/O address of the parallel port. Options: 378, 278, or 3BC Sets the interrupt request of the parallel port. Options: IRQ 7 or IRQ 5 Assigns DMA channel 1 or DMA channel 3 for ECP parallel port function. This item becomes active only if you select Extended Capabilities Port (ECP) as the operation mode. Options: DMA 1 or DMA 3 Enables or disables the internal speakers. You can override this by toggling Fn-F6 during computer operation. Options: Enabled or Disabled Sets the display on boot-up. When set to Auto, the computer automatically determines the display device. If an external display device (e.g., monitor) is connected, it becomes the boot display; otherwise, the computer LCD is the boot display. When set to Both, the computer outputs to both the computer LCD and an external display device if one is connected. Options: Auto or Both Chapter 5 Software 87