Acer TravelMate 310 User Guide - Page 109
Software, Setting a Password
View all Acer TravelMate 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
310-e.book Page 89 Tuesday, October 27, 1998 5:17 PM Setup Utility Parameter Description User Password is When set, this password protects the computer and this Setup Utility from unauthorized entry. When Password on boot and/or Password check during Resume is enabled, you need to enter this password to continue operation. Before setting the user password, you need to set the Supervisor Password. Options: Disabled or Enabled Set Supervisor Password Press Enter to set the supervisor password. See "Setting a Password" on page 89 for how to set a password. Set User Password Press Enter to set the user password. See "Setting a Password" on page 89 for how to set a password. Password on boot When enabled, the computer prompts you for a password when the computer boots up. Options: Enabled or Disabled Password check during Resume When enabled, the computer prompts you for a password when the computer resumes from standby or hibernation mode. Options: Disabled or Enabled Note: To set the User Password or the Password on boot and Password check during Resume parameters, you need to set the Supervisor Password first. Setting a Password Follow these steps: 1. Use the ↑ and ↓ keys to highlight a Set Password parameter (Supervisor or User) and press the Enter key. Chapter 5 Software 89